Corten A – a weather resistant steel created by alloying copper, chromium and nickel. In addition to this, Corten A has added phosphorous which makes the material best suited for gas flue applications and for aesthetic facias The material is not recommended in heavy load bearing applications – in this case Corten B or S355J2W should be considered.
The top layer of the material reacts with atmospheric elements to form a rust coloured protective layer which not only makes the steel virtually maintenance free but also provides a pleasing and consistent finish.
Please refer to the technical specifications below... Grades & Equivalents | Corten | EN 10025-5:2004 | | Corten A | S355 J0WP |
Chemical Composition | Grade | C | Si | Mn | P | S | Al | V | Cu | Cr | Ni | | Corten A | 0.12 | 0.25/0.75 | 0.20/0.50 | 0.07/0.15 | 0.030 | 0.015/0.06 | – | 0.25/0.55 | 0.50/1.25 | 0.65 | Mechanical Properties | Grade | Thickness (mm)
Strip Products | Plate Products | Yield Strength
Rel N/mm²
Minimum | Tensile Strength
Rm N/mm²
Minimum | Elongation
A50 %
Minimum | | Corten A | 2 – 12 | 6 – 12 | 345 | 485 | 20 | (Please note: the technical information above is for guidance only – for exact specifications please check with our Sales Team)
For more information about Corten A weather resistant steel or to receive a prices and further specifications, contact us. | Maximum values unless otherwise stated Corten A, best quality Corten A , wide variety of Corten A, Corten A India, Corten A distributor Mumbai, Corten A traders, prime quality Corten A, Source for Corten A, specialize in Corten A, Corten A with Test Certificate Contact: Total Piping Solutions Mafatlal House, H.T.Parekh Marg,
Backbay Reclamation 5th & 6th Floor,
Mumbai - 400020, Maharashtra
[email protected]
[email protected]
www.totalpipingsolutions.com | |
